Square Footage Calculator

Measure a room, patio, or other surface in square feet. Pick a rectangle, circle, triangle, or L-shape, then enter the dimensions in feet. The free calculator converts your result to square yards and square meters and lets you add an allowance for cuts or waste. Enter your own price per square foot to estimate a material budget. No signup is required.

Estimate

100 sq ft
Square yards
11.11
Square meters
9.29
Area with allowance
100 sq ft
Material cost
Enter a unit price

Based on the dimensions you entered.

Measure length and width at right angles

Square plan labeled 10 feet on each side and 100 square feet across the interior.
Measure the surface you plan to cover. Split irregular areas into simple pieces so you can add or subtract them separately.

Coverage quick reference

Use these rectangular examples to compare measured area with the area after a 10% allowance. Material sold by the box may require another round up.

Dimensions (ft)Area (sq ft)With 10% (sq ft)
5 × 105055
8 × 108088
10 × 10100110
12 × 10120132
14 × 10140154
16 × 10160176
18 × 10180198
20 × 10200220

Cost estimate

Enter your supplier’s price per square foot in the calculator. The examples below multiply 110 sq ft by three sample unit prices, using a 10 × 10 ft room and a 10% allowance.

Order areaSample price per sq ftMaterial total
110 sq ft$2.00$220.00
110 sq ft$4.00$440.00
110 sq ft$6.00$660.00

These unit prices are arithmetic examples. Confirm box coverage, minimum order quantity, tax, and delivery with your supplier. Set the allowance for your layout and product.

Formula and worked example

Rectangle
Square feet = length × width
Circle
Square feet = π × (diameter ÷ 2)²
Triangle
Square feet = base × perpendicular height ÷ 2
L-shape
Square feet = outside length × outside width − cutout length × cutout width
Conversions
Square yards = square feet ÷ 9. Square meters = square feet × 0.09290304.

Example for a 10 × 10 ft project

A room that is 10 ft long and 10 ft wide has 10 × 10 = 100 sq ft. That is about 11.11 sq yd or 9.29 sq m. A 10% allowance brings the order area to 110 sq ft. At $4 per sq ft, the material estimate is $440.

Frequently asked questions

How many square feet is a 10 × 10 room?

A rectangular room that measures 10 ft by 10 ft has 100 sq ft of floor area before any cuts or extra material.

How do I enter feet and inches?

Divide the inches by 12 and add them to the feet. For example, 10 ft 6 in is 10.5 ft.

How do I measure an L-shaped room?

Measure the outside rectangle and the missing corner. Subtract the missing rectangle from the outside rectangle. Keep both cutout dimensions smaller than the corresponding outside dimensions.

How do I measure a circular area?

Enter the diameter, which is the distance across the center. The calculator uses half that distance as the radius.

Does ceiling height affect floor square footage?

Floor square footage uses the floor dimensions. For a wall, measure the length and vertical height of that wall instead.

Should I use the extra-material result to order flooring?

Use the result as a starting point and check the product’s cut allowance and box coverage. If the supplier sells whole boxes, divide by the area per box and round up.